The Ultimate Floor Stripping & Waxing Guide for Commercial Spaces in New Jersey

Vinyl Composition Tile (VCT) and other hard surface floors are a popular choice for commercial spaces across New Jersey due to their durability and clean look. However, without proper maintenance, these floors can quickly become dull, scratched, and dingy.

The secret to maintaining that pristine, mirror-like shine? Regular, professional Floor Stripping & Waxing.

What is Floor Stripping and Waxing?

Floor stripping and waxing is a comprehensive restorative process for hard surface floors. It involves removing all old layers of wax, dirt, and debris down to the bare tile, and then applying multiple fresh coats of premium commercial floor finish.

This isn't just about aesthetics; the wax acts as a protective barrier. Without it, the actual tile absorbs the dirt, scuffs, and spills, leading to permanent damage.

Signs Your Floors Need Stripping and Waxing

If you're noticing any of the following, it’s time to call in the professionals:

1. Dull Appearance: The floor has lost its original glossy shine, even immediately after being mopped.
2. Discoloration: The wax layers have yellowed over time, often due to embedded dirt or UV exposure.
3. Deep Scratches and Scuff Marks: The protective layer is worn down, and the actual tile is taking the brunt of the foot traffic.
4. Sticky Residue: Previous improper cleaning or wax application can leave a tacky film that attracts more dirt.

Our Professional 4-Step Process

At C&S Commercial Cleaning, we follow a rigorous process to ensure flawless results:

Step 1: Complete Stripping

We apply a high-grade chemical stripper to break down the old wax finish. Using commercial rotary scrubbers, we agitate the stripper to fully lift the old wax and embedded grime from the pores of the floor.

Step 2: Thorough Extraction and Rinsing

The dissolved wax slurry is carefully extracted using wet vacuums. We then thoroughly mop and rinse the floor to neutralize any remaining chemicals. This step is crucial; if the floor isn't perfectly neutral, the new wax won't adhere properly.

Step 3: Application of Premium Wax

Once the bare floor is completely dry, we apply a high-quality, slip-resistant commercial floor sealer, followed by 3 to 5 coats of premium high-gloss wax. We allow proper drying time between each coat for maximum durability.

Step 4: High-Speed Burnishing

For the ultimate finish, we use a high-speed burnisher to physically harden the wax and polish it to a brilliant, wet-look shine.

How Often Should You Strip and Wax?

For typical commercial environments in NJ, we recommend a full strip and wax every 6 to 12 months.

However, to maintain the appearance between full stripping services, we recommend regular "scrub and recoat" services or high-speed buffing on a monthly or quarterly basis, depending on your foot traffic.

Protect Your Investment

Replacing commercial flooring is a massive expense. Regular floor maintenance is a fraction of the cost and keeps your business looking sharp and professional.

Need to bring the shine back to your facility? Get a free floor care quote today from C&S Commercial Cleaning.